Installation
1. Connect the gateway to incoming services:
l
For Ethernet services, connect one end of an Ethernet cable to the
WAN
port on the gateway and connect
the other end of the cable to the wall jack installed by your provider.
l
For fiber services:
a. Slide open the small door at the right end of the gateway's back.
b. Insert the SFP transceiver (included with the gateway) into the port.
c. Connect one end of the fiber cable to the SFP transceiver and connect the other end of the cable
to the wall jack installed by your provider.
2. Connect a LAN port on the gateway to your PC using an Ethernet cable.
3. Plug the power adapter to the wall outlet and then connect the other end of it to the
Power
port of the
gateway.
4. Turn on the unit by pressing the
Power
button on the back of the gateway.
Your gateway is now automatically being set up to connect to the Internet. This process may take a few minutes to
complete.
If you are unable to connect to the Internet, make sure that all cable connections are in place and the gateway’s
power is turned on.
