Things to Know Before Use:
This
heater can only be operated manually (knobs, buttons, and
switches). It is meant as a “set it and forget it” heater until it is time to
turn off and unplug.
o
SMART+ PRODUCTS’s future models will accommodate a
remote control option.
The
Control Panel
is located inside the access door directly beneath the
simulated flame.
To avoid damage to the unit, and needless repair, do not manipulate knobs and
toggles beyond recommended function combinations (7 possible combinations
listed above).
The Main Power Switch must be manually switched to the “ON”
position, first, and foremost
.
Where To Find the Main Power Switch And How to Engage it.
1.
Locate the Main Power Switch at the front, bottom, right corner, of
the heater (reference heater diagrams) and toggle to the “ON”
position. This will set the heater into “stand by” mode and all other
functions, toggles, switches, and knobs will become operational.
Knowing Your Control Panel:
1.
Locate the control panel access door directly beneath the simulated flame.
Pull the control panel access door open, by pulling the knob outward.