-11-
Coding Transmitters
Note:
The button you choose (1-4) for the
first
TX you
code will be the same button for all subsequent
transmitters. Up to 200 TXs can be stored into
memory. If more than 200 are stored the system
will disregard any attempts to code new TXs.
1
Press the
CODE
button for 2 seconds the display will
show
Code Learn
(Fig. 9).
2
Choose which transmitter button will operate the gate
and press that button twice.
The first press will allocate a number to the remote
and the display will show
Remote XXX
(Fig. 10), on
the second press the display will show
CODE SET
.
Test the transmitter - the opener will beep to confirm.
Repeat the above steps to code additional transmitters.
Remote TX Coding (Hands Free Learning)
It is possible to code new transmitters via an already
coded remote without being in contact with the control
panel. This is useful if more than one device is operated
by the transmitter. This also takes the guess work out of
button allocation as this is done automatically.
1
Ensure Hands Free Learning is enabled (page 17).
2
Press
TX BUTTON 3 + 4
together for 2 seconds. The
opener will beep to signal Code Learn Mode.
3
Press any button on new transmitter twice (Fig. 11).
The opener will beep to confirm code learned.
Deleting One Transmitter
This is useful if the transmitter is lost and the transmitters
reference number is known.
1
Press and hold the
CODE
button for 5 seconds. The
display will show
Del Remote ALL
(Fig. 12).
2
Press
SET
to scroll up or
PB
to scroll down to
required transmitter number - e.g.
Remote 023
.
3
Press
CODE
for 3 secs to delete.
Deleting All Transmitters
1
Press and hold the
CODE
button for 5 seconds, the
display will show
Del Remote ALL
(Fig. 12).
2
Press
CODE
for 3 secs to delete.
Transmitter Button Allocation
Note:
The following procedure alters these settings for ALL
coded transmitters.
1.
Press
MENU
for 3 secs. Press
SET
to cycle through
to Transmitter Allocation menu (Fig. 13). The LCD will
display functions on the first line and button allocation
on the second.
2.
Press
PB
to cycle through buttons 1–4 (0 to disable).
Note:
To allocate
ALL BUTTONS
to the same function
press and hold PB until display show
All
.
3.
Press
MENU
to allocate the button and move to the
next function and repeat as required.
4.
Press
MODE
to save and exit to normal operation.
Note:
If a button is already allocated to one function it will
not be available for any other.
© November 2011 Smart Openers Pty Ltd
Remote 001
Del Remote
All
PB PD OP CL
01 02 00 00
Fig. 11
Existing
Remote
Uncoded
Remote
Code Learn
Fig. 9
Fig. 10
Fig. 12
Fig. 13
