7
6
General Instructions
Initial Start-Up
Initial Start-Up
Insert Batteries and Pair-up
Open the battery door in the back of the scale.
Insert the batteries (4 x 1.5V AA) into the battery compartment according to the polarity
indications marked inside the compartment.
* The all digits will be shown on the LCD.
The scale will be automatically pair-up with the system when used for the first time. The
signal symbol will be displayed at the same time,
which
indicates the
quality of
the
network signal.
With batteries correctly installed, you will see the black “UNIT” button in
the battery
door. Press it to select measurement unit. The default measurement unit is “lb”. You may
press “UNIT” button to choose among pound, kilogram and stone.
CAUTION
When the symbol “ ” and “ Lo” appear, the device will power off. Then you sh
ould
replace with a
new set of batteries. Please replace all four batteries at the same time. Do NOT mix the old batteries
with the new one
s
.
Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage.
Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries
and scrapped device.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.
If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the batteries
before storing.
If using the s
cale three times a day, and the lifetime of batter
ies should be
one year.
Select Measurement Unit
The Smart Meter iScale Ce
llular
Weight
Scale
operates utilizing
SENSE ON
technology.
The sensitive SENSE ON technology offers convenience for the user.
If SUCCEED, symbol “
[ ]
” will be shown on the LCD.
If FAIL, symbol “E1” will be shown on the LCD.
La
y the scale on the floor and it will turn off in 10 seconds
.
The signal symbol displays the following status
：
Strong
Medium
General
Weak
No Signal
