2
3
Safety Information
Safety Information
The
Smart Meter
iScale
Cellular
Weight
Scale is intended for adults and children(10-17
years old) to measure weight in the home.
INDICATIONS FOR USE
The warning signs and symbols are essential to ensure your correct and safe use of
this product and protect you and others from injury. Please kindly find the meanings of the
warning signs and symbols, which you may encounter in the label and user manual, as
follows:
Symbol Meaning
Symbol for “THE OPERATION
GUIDE MUST BE READ”
Symbol for “MANUFACTURER”
Symbol for “ENVIRONMENT
PROTECTION – Waste electrical
products should not be disposed of with
household waste. Please recycle where
facilities exist. Check with your local
authority or retailer for recycling advice”
Symbol for “SERIAL NUMBER”
Symbol for “DIRECT CURRENT”
To ensure your safety as well as the service life of your scale, please avoid
using the scale under the following circumstances:
Slippery floor such as tile floor
Jumping onto the platform immediately after bath or with wet feet
Near a cell phone or microwave oven
Avoid storage in the following locations:
Where there is water
Where the device may be exposed to extreme temperatures, humidity, moisture, direct
sunlight, dust, or salt air
Where there is risk of shock or drop
Where you store chemicals or corrosive gases
Where in reach of the infants or children
Your
i
Scale and Its Environment
Efficient Use of Your
i
Scale
SN
Symbol for “TYPE BF APPLIED
PARTS”
Symbol for “MANUFACTURE
DATE”
Caution: These notes must be
abserved to prevent any damage
to the device.
To ensure the accuracy of measurement, please follow below instructions when
you start measurement.
Place the scale on a flat, hard surface. Soft surface such as carpet will affect the
performance of the scale.
Start measurement at least two hours after
waking
up or
d
inning.
Avoid measurement immediately after strenuous exercise, sauna or bath, drinking, and
dining.
Always start measurement in the same time slot and on the same scale located on the
same flat, hard surface.
This device is not intended for use in an oxygen rich environment.
Any information provided by this scale is in no way meant to treat, cure or prevent any
disease or illness from happening. If in doubt, contact your physician.
It is intended for use in the home only.
CAUTION
The
iScale
Cellular
Weight
Scale offers you a way to manage your health. Please be aware
that this device is designed for children(10-17 years old) and adults’ self-measuring. Any
information provided by this device is in no way meant to treat, cure or prevent any disease or
illness from happening.
This device is contraindicated for any female user who may be pregnant..
The
iScale
Cellular
Weight
Scale is equipped with data transmission function. It may emit
electromagnetic energy so as to perform its intended function. Nearby portable and mobile RF
communications equipment can affect the performance of the device .
Portable and mobile RF communications equipment can affect the measuring accuracy of the
iScale Cellular Weight Scale.
Kindly note that the use of accessories, transducers or cables other than those specified, with
the exception of transducers and cables sold by the manufacturer as replacement parts for
internal components, may result in increased EMISSIONS or decreased IMMUNITY of the
device.
Be aware that misuse of electrical equipments can cause electric shock, burns, fire and other
hazards. Please do not use the device in flammable gas environment.
Warning that the
iScale Cellular Weight Scale
should not be used adjacent to or stacked with
other equipment.
Manufacturer will make available on request circuit diagrams, component parts list,etc.
WARNING:No modifications of this equipment is allowed.
During measuring, the patient will contact with the upper surface of the scale. The ABS plastic
surface of the scale is type BF Applied part.
The device doesn’t need to be calibrated in five years lifetime.
Do not touch the output of batteries when using the scale.
The patient is an intended operator. The patient can perform all the operations in the manual,
such as measurement, data transmitting, changing batteries.
