background image

i

Glucose

®

   57

Warranty

Smart Meter LLC warrants that this product will be free from 
defects in materials and workmanship for five years from the date 
of purchase.

This warranty does not apply to the performance of an iGlucose® 
Blood Glucose Meter that has been altered, misused, tampered with 
or abused in any way.

This warranty applies only to the original purchaser of the iGlucose 
Blood Glucose Monitoring System.

Please complete and return the enclosed warranty card.

Different models have different specifications. This warranty applies 
only to the iGlucose Blood Glucose Monitoring System; other models 
are not covered with this warranty card.

iGlucose is a trademark of Smart Meter LLC. 

Note:

 During blood glucose measurement, the iGlucose Meter 

itself may come into contact with blood. All parts of the iGlucose 
Monitoring System are considered biohazardous and can potentially 
transmit infectious diseases. Please follow your healthcare 
professional’s direction to properly dispose of the used iGlucose 
System after removing the batteries.

Summary of Contents for iGlucose
































































Reviews: