background image

4

5

.

Performance

This product is designed primarily to operate in summer months but will also work in spring and autumn 
provided there is good sunshine. Performance is directly related to the amount and strength of sunlight received.

Position

IMPORTANT!

When reconnecting the pump and panel take care 
to ensure that the connectors are water tight. Slightly twist the 

connectors when pushing together, ensure the red o-ring 
seal remains in it’s groove and it is not displaced.

Important!

In bright direct sunlight your pump will work well 
with a consistent fountain height.

In slightly cloudy conditions your pump will work 
however fountain height will vary as clouds pass 
in front of the sun.

At night the solar panel does not generate 
power and your pump will NOT work.

In overcast conditions the solar panel does not 
generate enough power to run the pump and it 
will NOT work.

Position your fountain so that receives direct sunlight. The fountain will NOT work if the solar panel 
is in a shaded area.

The 360˚ fountain head 
accessory can be used to 
enhance your fountain.
Note: It will only work 
effectively in bright sunlight 
or if battery is charged.

The short nozzle can be used to 
produce a finer higher 
stream of water.
Note: May need to be 
removed in bright sunlight to 
avoid splashing.

Fountain Heads

Warnings

Frost causes damage, store whole product inside during cold weather.

0°C/32°F

Important!

Water must be regularly topped off. We recommend regularly changing the 
water to ensure it remains clean and free from debris.

Summary of Contents for smart SOLAR Birdbath









Reviews: