2
7
Pump Removal / Assembly
Cascading Bowls Fountain Assembly
Check to ensure both sets of
connectors (black pump
connectors and green battery
connectors) are water tight. When
reconnecting slightly twist when
pushing together, ensure the red
sealing ring remains in it’s groove
and is not displaced.
Important
Battery/Pump Connectors
To ensure the tubes from the pump are
connected to the solar panel, try lifting
the solar panel gently by pulling on the
solar panel nozzle. If the panel lifts out
the tubes are not connected. See
illustration below for assembly.
Remove the top part, unplug the pump
connectors (1), and disconnect the
tubing (2).
When re-assembling, ensure tubes (3)
are connected through to the back of the
solar panel, and bung (4) is securely
fitted in the hole.
!
.
Connect tube (1) to underside of solar panel (2).
Run tube through top bowl and into column.
Connect tube to pump (4) and place pump (4)
into column.
Run pump cable (3) from column and up through
top bowl and connect to solar panel.
Place solar panel into top bowl and connect to top
of column. Adjust to ensure spout overhangs
middle bowl for water flow.
See pg 7 on how to connect the upper tier
components (if necessary).
Fill main bowl with water. Top off water as needed.
2
3
1
4
2
1
3
4
