1.4 Installation
5
To Install the Smart-i Drive in your car, please follow the steps below:
1. Firstly, take out the Smart-i Drive and the Windscreen Mount.
2. Attach the Windscreen Mount to the unit.
4. Position the Smart-i Drive at the front of the car. Please note that the recorder should be
placed in behind the rear view mirror to comply with regulations.
3. Insert the Micro SD Card (if purchased) into the unit. To insert, place the card in the slot
(shown below) until you hear a slight click sound confirming the card has been placed
successfully.
5. Take the ‘Car Charger’ out of the box.
6. Connect the USB end of the car charger to the Smart-i Drive and the other end to the Cigarette
Lighter Power Socket in your vehicle.
7. Turn on the ignition to power the unit.
8. Finally, press the ‘Power On’ to turn the unit on.
