SMART Embedded Computing RTM-ATCA-F140 Series, Installation & Use Manual

Page: 12 / 82

12 RTM-ATCA-F140 Series Installation and Use (6806800M97M)
About this Manual
About this Manual
Conventions
The following table describes the conventions used throughout this manual.
MDC Management Data Clock
MDIO Management Data Input/Output
MMC Module Management Controller
PHY Physical Layer
PICMG PCI Industrial Computer Manufacturers Group
PCI Peripheral Component Interconnect
QSFP+ Quad Small Form-factor Pluggable Plus
RTM Rear Transition Module
SFP Small Form-factor Pluggable
SFP+ Small Form-factor Pluggable Plus
SPI Serial Peripheral Interface
TOD Time of Day
UART Universal Asynchronous Receiver/Transmitter
Abbreviation Definition
Notation Description
0x00000000
Typical notation for hexadecimal numbers (digits are 0 through F), for example used
for addresses and offsets
0b0000 Same for binary numbers (digits are 0 and 1)
bold
Used to emphasize a word
Screen
Used for on-screen output and code related elements or commands in body text
C
Bold
Used to characterize user input and to separate it from system output
Reference
Used for references and for table and figure descriptions
File > Exit Notation for selecting a submenu
<text> Notation for variables and keys
[text] Notation for software buttons to click on the screen and parameter description
... Repeated item for example node 1, node 2, ..., node 12