SMART Embedded Computing Penguin Edge RTM-ATCA-F140, Manual

Page: 10 / 32

10 Penguin Edge™ RTM-ATCA-F140 Safety Notes Summary (6806800P10F)
Safety Notes

Make sure that TPE connectors near your working area are clearly marked as
network connectors.

Verify that the length of an Ethernet cable connected to a RJ-45 TPE connector
does not exceed 100 meters or approximately 328 feet.

Make sure the TPE connector of the system is connected only to Safety Extra Low
Voltage (SELV) circuits.

If in doubt, ask your system administrator.
For more information, see the documentation of the respective product.
SFP/SFP+ Modules
Personal Injury and Damage of the RTM and SFP/SFP+ Modules
Installing and using SFP/SFP+ modules that are not fully certified and do not meet all
relevant safety standards may damage the RTM and the SFP/SFP+ modules and may lead
to personal injury.
Only use and install SFP/SFP+ modules that are fully certified and meet all relevant safety
standards.
Personal Injury
Optical SFP/SFP+ modules may be classified as laser products. When installing and using
any of these SFP/SFP+ modules the regulations which correspond to the respective laser
class apply to the whole RTM. Not complying to these regulations may lead to personal
injury.
When installing and using optical SFP/SFP+ modules which are classified as laser
products, make sure to comply to the respective regulations.
Eye Damage
Optical SFP/SFP+ modules may emit laser radiation when no cable is connected. This
laser radiation is harmful to your eyes. Do not look into the optical lens at any time.
SFP/SFP+ Module Damage
The optical port plug protects the optical fibers against dirt and damage. Dirt and damage
can render the SFP/SFP+ module inoperable.
Only remove the optical plug when you are ready to connect a cable to the SFP/SFP+
module. When no cable is connected cover the port with an optical port plug.