SMART Embedded Computing Centellis 2x00 User Card-10GE, Installation And Use Manual

Page: 29 / 50

Centellis 2x00 User Card-10GE Installation and Use (6806800H33E) 29
Chapter 2
Centellis 2x00 User Card-10GE Hardware
2.1 Overview
The Centellis 2x00 User Card-10GE is compliant to PICMG 3.0 R3.0 (AdvancedTCA). The
shelf manager and hub board is equipped with two backplane connectors.
To prevent connector damage the alignment pin offers a guide rail to the slot and a coding
mechanism to ensure the installation of the board in the matching slot.
The hardware consists of:
 Payload hardware section with
– Ethernet interfaces to the backplane and to the face plate
 IPMI controller section with
– IPMB0-A and IPMB0-B interface to the backplane
– Handle switch and status LED interface to the face plate
 Power supply
Figure 2-1 Hardware