Troubleshooting
No video?
1) Are the green LEDs on both the transmitter and receiver units? If not check that
the 24V power supply (PSU) is connected and the LED on the PSU is lit. Check the
cable compensation dials on the underside of the unit. Over compensation of the
Red and Blue channels can cause the display to misinterpret the sync pulses and
not display an image.
2) Is the video source a laptop or floating? (a floating source is one which has no
earth reference i.e. uses a double insulated PSU or a figure 8 mains cable). If so
make sure the PSU is an earthed unit when not using the PSU supplied.
3) Is the audio input level too high? The audio level should be set to line level (0dB or
700mV peak to peak) to prevent interference.
Display has problems syncing?
1) Is the audio input level too high? The audio level should be set to line level (0dB or
700mV peak to peak) to prevent interference.
-
16-
Summary of Contents for SmartLynx-X+ SLX-212/D
Page 1: ...User Guide SmartLynx X Cat5 AV Extender SLX 212 D...
Page 21: ......