background image

 

Page 

21

 of 

21

 

©Smart-e(UK) Ltd. 

 

SDS-7000 User Manual 

Appendix 

 

Limited Warranty Statement 
 

A.

 

Extent of limited warranty 

1.

 

Smart-e (UK) Ltd warrants to the end-user customers that Smart-e  
product specified above will be free from defects in materials and  
workmanship for the duration of 3 years, which duration begins on the  
date of purchase by the customer. Customer is responsible for  
maintaining proof of date of purchase. 

2.

 

Smart-e warranty covers only those defects which arise as a result of  
normal use of the product, and do not apply to any: 
a. Improper or inadequate maintenance or modifications 
b. Operations outside product specifications 
c. Mechanical abuse and exposure to severe conditions 

 

3.   If Smart-e receives during applicable warranty period notice of defect,  
      Smart-e will at its discretion replace or repair defective product . If  
      Smart-e is unable to replace or repair defective product covered by the  
      Smart-e warranty within reasonable period of time Smart-e shall refund  
      the cost of the product. 

 

4.   Smart-e shall have no obligation to repair, replace or refund unit until  
      customer returns defective product to Smart-e. 
5.   Any replacement product could be new or like new, provided that it has  
      functionality at least equal to that of the product being replaced. 
6.   Smart-e warranty is valid in any country where the covered product is  
      distributed by Smart-e. 

 

B.

 

Limitations of warranty 

TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER SMART-E NOT ITS THIRD  
PARTY SUPPLIERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY  
KIND WHETHER EXPRESSED OR IMPLIED , WITH RESPECT TO THE SMART-E  
PRODUCT , AND SPECIFICALLY DISCLAIM IMPLIED WARRANTIES OR  
CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY , AND FITNESS  
FOR A PARTICULAR PURPOSE 
 

C.

 

Limitations of liability 

To the extent allowed by local law the remedies provided in this warranty  
statement are the customers sole and exclusive remedies 
 
TO THE EXTENT ALLOWED BY LOCAL LAW , EXCEPT FOR THE OBLIGATIONS  
SPECIFICALLY SET FORTH IN THIS WARRANTY STATEMENT , IN NO EVENT  
WILL SMART-E OR ITS THIRD PARTY SUPPLIERS BE LIABLE FOR DIRECT,  
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHETHER  
BASED ON CONTRACT , TORT OR ANY OTHER LEGAL THEORY AND WHETHER  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
 

D.

 

Local law 

To the extent that this warranty statement is inconsistent with local law, this  
warranty statement shall be considered modified to be consistent with such law 

 

Summary of Contents for SDS-7000






















Reviews: