C H A P T E R 3
Using your interactive whiteboard system
17
Setting
Use
Notes
3D Format
Displays the current 3D
format (
Interleaved
or
Under-over
).
Interleaved
breaks down the image frame for
each eye, alternately displaying a line of visual
information from each frame.
Under-over
concurrently displays horizontally
stretched image frames for each eye, one
above the other.
3D Invert
Left-Right
Selects the 3D Invert setting
(
L-R
or
R-L
).
L-R
displays visual data for the left eye first.
R-L
displays visual data for the right eye first.
Auto Signal
Detect
Enables or disables signal
searching of input
connectors.
The default is off.
Select
On
to have the projector continuously
switch inputs until it finds an active video
source.
Select
Off
to maintain signal detection in one
input.
Lamp Reminder Turns the lamp replacement
reminder on or off.
This reminder appears 100 hours before the
recommended lamp replacement.
Lamp Mode
Adjusts lamp brightness to
Standard
or
Economy
.
Standard
displays a high-quality, bright
image.
Economy
increases the lamp life by
decreasing the brightness of the image.
Auto Power Off
(minutes)
Sets the length of the auto
power-off countdown timer
between 1 and 240 minutes.
The default is 120 minutes.
The timer begins to count down when the
projector no longer receives a video signal.
The timer finishes when the projector enters
Standby mode.
Select
0
to turn off the timer.
Zoom
Adjusts the zoom to the
centre of the image in or out
from 0 to 30.
The default is 0.
Zooming in cuts off the outer edges of the
source video.
Projector ID
Displays the projector’s
unique ID number (from 0 to
99) within your organisation’s
network.
You can refer to or change this number when
using the network remote management feature
(see
