A P P E N D I X B
Remotely managing your interactive flat panel
86
smarttech.com/kb/170446
Assigning a value for a video control setting
Use the
set
command to assign values for a video control setting. In the example below, the user
wants to set the contrast to 70 for the HDMI1 video input.
>set contrast HDMI1=70
contrast HDMI1=70
SMART Board 8070i-G4-SMP interactive flat
panel commands
The following tables contain commands for SMART Board 8070i-G4-SMP interactive flat panels.
Power state
Use the following commands to identify power state settings.
Command
Response
Possible values
Standby
mode
get intpowerstate
intpowerstate=
[Value]
l
standby
l
on
l
dpms-standby
l
welcome
l
prox-reenable-wait
l
pre-standby
l
pre-standby-auto
Yes
get powerstate
powerstate=
[Value]
l
on
l
ready
l
standby
l
off
Yes
get standbymode
standbymode=
[Value]
l
normal
l
eco
Yes
Use the following commands to assign power state settings.
Command
Possible values
Response
Standby
mode
set intpowerstate
[Value]
l
=standby
l
=on
l
=dpms-standby
l
=welcome
l
=prox-reenable-wait
l
=pre-standby
l
=pre-standby-auto
intpowerstate=
[Value]
Yes
set powerstate
[Value]
l
=on
l
=ready
l
=standby
l
=off
powerstate=
[Value]
Yes
set standbymode
[Value]
l
=normal
l
=eco
standbymode=
[Value]
Yes
