Source selection controls
These commands switch input sources. The source type determines which commands can be
accepted.
Command
Response
Available in Standby
mode
get input
input=[field]
Yes
set input=[field]
input=[field]
No
The following table describes the source selection commands:
Command
Description
get input
Returns the projector’s current input.
set input=[field]
Returns the input to one of the selectable fields.
The following table describes the command/response definitions for switches between different
embedded applications on the appliance:
Command
Response
Powered off
set application [target]
application=[current]
No
get application
application=[current]
Yes
The following table describes field definitions for switches between different embedded applications
on the appliance:
Field
Possible values
Description
Current application
application=whiteboard
l
whiteboard
l
web
l
l
viewscreens
The appliance is currently
running this application.
Target application
set application=whiteboard
l
whiteboard
l
web
l
l
viewscreens
The appliance is set to the
target application.
A P P E N D I X
A
Remotely managing your interactive whiteboard system
74
