SMART Board 6065 HD, Installation And Maintenance Manual

Page: 65 / 70

APPENDIX B
REMOTELY MANAGING THE DISPLAY
57 smarttech.com/kb/171204
Command Possible values Response Standby
mode
set brightness [Value] + [Incremental value]
- [Incremental value]
=0–100
brightness= [Value] No
set sharpness [Value] + [Incremental value]
- [Incremental value]
=0–100
sharpness= [Value] No
set colortemp [Value] =normal
=warm
=cool
=user
colortemp= [Value] No
set red [Value] + [Incremental value]
- [Incremental value]
=0–100
red= [Value] No
set green [Value] + [Incremental value]
- [Incremental value]
=0–100
green= [Value] No
set blue [Value] + [Incremental value]
- [Incremental value]
=0–100
blue= [Value] No
Audio
Use the following commands to identify audio settings.
Command Response Possible values Standby
mode
get volume volume= [Value] 0–100 No
get mute mute= [Value] on
off
No
get balance balance= [Value] 0–100 No
Use the following commands to assign audio settings.
Command Possible values Response Standby
mode
set volume [Value] + [Incremental value]
- [Incremental value]
=-50–50
volume= [Value] No
set mute [Value] =on
=off
mute= [Value] No