Adusting the XTPro Xtreme via Infrared Remote Tool
Adusting the Smart-AVI XTPro Xtreem using the free included infrared remote control
tool has been made simple for you. Follow these brief steps to adjust Gain, Contrast
and Skew of your XTPro Xtreme unit at the receiver/display monitor location(s):
GAIN
Gain controls the intensity of the colors displayed on your monitor. There are three
signals the Gain function controls – red, blue and green colors (RGB). Too much red
gain, and your reds will appear “hot” and blown-out. Too little red gain, and the red
hues within the image will appear too diluted or even sepia in tone. A perfectly-
adjusted gain signal delivers vivid, vibrant colors on display screen.
To adjust the XTPro Xtreem’s Gain signals with the IR remote:
• Make sure the XTPro Xtreem units
Transmitter/Receiver) have been powered on.
• The display window of the Receiver will read “SA”
for Smart-AVI. This is the “main menu” point of
the XTPro Xtreem.
• Press (AV) and then (1R), (2G) or (3B) to put the
XTPro in Gain Control mode. The (1R), (2G) and
(3B) buttons on the IR remote select the red,
green or blue gain signals respectively.
• As you adjust the gain signals using the (+) and (-)
buttons on the remote, your XTPro Xtreem display
window will indicate the signal level for each
adjustment (i.e. the number will go up or down
depending on the color adjustment for each
signal).
• Once the gain signal for each color has been
adjusted to your liking, the unit will automatically save your settings.
• When you’re done using the Gain Control mode, return to the main menu
(“SA”) by pressing (Esc) on the remote.
VOL
ENTER
SRC-2A
AV
Data
1
2
4
5
6
3
7
8
9
0
+
Esc
CH
-
R
G
B
CONTRAST
Contrast controls how light or dark an image is on your screen by adjusting the
intensity of the dark/light tones of the image. The Contrast function controls the
light/dark signal of the overall image being displayed. Too much contrast, and your
image will appear too faded, and white-washed. Too little contrast, and your picture
will basically, be too muddy, or even appear black.
A perfectly-adjusted contrast signal gives you a crisp, well-defined image on your
display screen.
To adjust the XTPro Xtreem’s Contrast signal with the IR remote:
• Make sure the XTPro Xtreem units
(Transmitter/Receiver) have been powered on.
• The display window of the Receiver will read
“SA” for Smart-AVI. This is the
“main menu” point of the XTPro Xtreem.
• Press (AV) and then (5) to put the XTPro
Xtreem in Contrast Control mode. As you adjust
the contrast signal using the (+) and (-) buttons on
the remote, your XTPro Xtreem window will
indicate the signal level you’re selecting.
• Once the contrast signal level has been adjusted
to your liking, the unit will automatically save your
settings.
• When you’re done using the Contrast Control
mode, return to the main menu (“SA”) by pressing (Esc) on the remote.
VOL
ENTER
SRC-2A
AV
Data
1
2
4
5
6
3
7
8
9
0
+
Esc
CH
-
R
G
B
