1. Position EZWall‐Pro 3x3 V2 conveniently and keep it unplugged.
2. Connect DVI output cables between the EZWall‐Pro 3x3 V2 and your video wall screens
3. Connect any input to their corresponding signal source (Blu‐Ray player, computer, etc)
4. Optionally connect the IR receiver to the IR input jack at the back of the EZWall‐Pro 3x3 V2.
5. Optionally connect an RS‐232 cable from a PC to the RS‐232 port of the unit for additional
control.
6. Optionally connect an Ethernet cable to the EZWall‐Pro for additional control over the internet (TCP/IP)
7. Turn on the EZWall‐Pro 3x3 V2.
8. Wait for a few seconds for the unit to initialize
hardware installation
