10
USING THE SmartControl SOFTWARE (continued)
Main Routing Window
The Main Routing Window enables you to control the router(s) connections by means of the Crosspoint
panel, the button panel, or with pre-recorded routes called macros.
Crosspoint Panel: This is the simplest way to route the connections. Simply click on the cross point itself.
The input on the left will then be routed to the output above.
Note: Inputs can be routed to several different outputs, but each output can only have a single input at
any one time. That means you can have several connections horizontally but not vertically.
On the screen shown in figure 10-1 the input buttons run down the left side and the output buttons run
across the top. They’re each labeled 1 through 8. This configuration directs video from source 1 to be dis-
played on all 8 displays.
Figure 10-1
Figure 10-2
On the screen shown in figure 10-2 source 1 is sent to display 1, source 2 to display 2, 3 to 3, 4 to 4, 5 to
5, etc.
