19
www.smartavi.com
Controlling the SMTCP-2 via HTTP
Matrix Menu
The matrix menu allows you to set the crosspoints for the matrix. Crosspoints are used to
route signals from the individual inputs to individual outputs. The output channels can only
have one input, but each input can have several outputs.
Example shown in diagram:
Input 1 to Outputs 3,4,5
Input
this
to Outputs 6,7,8
Input
test
to Output 1
Input 6 to Output 2
The Matrix Preset option allows you to save and recall crosspoint configurations with the
push of a button. To save a preset, simply configure your crosspoints and press the SAVE
button next to the desired preset. To recall a preset, simply click on the button with its name.
To edit the preset names, see the
Device Config
menu.
Once you have completed the Initial Setup for the SMTCP-2, you can now begin configuring
it for your matrix. The following details the individual menu options in the web interface:
Frame Address Menu
The frame address menu allows you to set the frame
address of the current matrix switch. Frame addresses
allow commands to be sent to different matrixes in
series. For more information on the specific commands
available, please see the instructions for your matrix
switch.
Controlling the CATXPro with the SMTCP module (continued)
Summary of Contents for CATXPro
Page 30: ...30 www smartavi com...
