Controlling with IR
Switching Ports with Remote Control
You have the option of controlling the CATSWITCH via Remote Control. The PLAZOOM remote is
used to control the CATSWITCH. The SM-EYE must be connected to the CATSWITCH ( this is an op-
tional connector not always available in all boxes) in order to interface the remote control with the
matrix. The way the remote control the matrix is as follows:
Xx<enter>yy<enter>
When XX is the output , YY is the input
To change the routing of the signals,
For example, to set output 3 to input 2 press “0” + “3” + ENTER, then press “0” + “2” + ENTER. If a
wrong button is pressed, the user must either press the ESC button or wait 5 seconds before restart-
ing the sequence.
Chapter 3: Software Installation & Operation
