SMART AIR Sqair, Manual, Page: 5 / 11

Setting up The Sqair
Before you start breathing clean
air, you’ll need to get your Sqair
ready for action. Here’s how:
Step 1: Attach the legs
Screw the four wooden legs, in a clockwise direction,
into the four screws in the base of the purifier.
Step 2: Set up your filters
1. Open your purifier 2. Remove the filters
from their bags
3. Put the filters back,
making sure the arrows
are in the right direction
Be careful not to
trap your fingers!
Note: if you’re using a carbon filter, make sure you insert it in the right order:
Carbon filter (bottom)
HEPA filter (top)
x 4
Cr t y M n i S r th N un Pr j t