SmarLink FW50, User Manual

Page: 6 / 28

Shenzhen Newchiba smartlink Technology Co., Ltd. www.newchiba.com
5
The LAN IP address can be set according to the requirements. The default address is 192.168.5.1.
Note that if users modify it, users need to use the new IP to log in to the management page after
completing the setup wizard. Then, click
“Next”.
When entering the wireless network configuration, users can modify the WIFI name and password.
Here the password of 2.4G and 5.8G is modified at the same time. If you need to modify it separately, you
can click “Wireless Settings 2.4G” or “Wireless Settings 5.8G”in the left menu bar. Then, click “Next”.
Then click “Finish” to complete the settings. If you need to modify, you can click “Back” or “Exit”;
after clicking “Finish”, the router will restart, and the settings will take effect after restarting.
Ⅴ
. Work Mode
Our device has five work modes: “Bridging”, “Gateway”, “Wireless to Wired”, “Wireless Client”,