SmarLink FW50, User Manual

Page: 15 / 28

Shenzhen Newchiba smartlink Technology Co., Ltd. www.newchiba.com
14
2. Network Mode
The network mode is divided into automatic selection and manual setting. The system defaults to
automatic selection. Generally, it can be automatically selected without special circumstances. Only when
the network type supported by the SIM card does not match, is manual setting required.
Ⅷ
. Network Settings
1. WAN settings
WAN settings can be divided into three modes: dynamic acquisition / static IP / PPPOE dial-up.
Users can select the appropriate mode according to different use conditions.
Dynamic acquisition refers that connect to the WAN port of the machine through the network cable,
and the other end is connected to the LAN port of the upper-level route, and then the device selects
dynamic acquisition to access the Internet (provided that the upper-level route can access the Internet).
The static IP refers that connect to the WAN port of the machine by the network cable, and the other
end is connected to the LAN port of the upper-level route, and then the device can perform related
settings to access the Internet (provided that the upper-level route can access the Internet). The IP address
here should be filled in the upper-level route DHCP. IP address in the server range, and cannot conflict