SMAR TP303, Operation, Maintenance And Instructions Manual

Page: 41 / 56

Configuration
3.21
Figure 3.24 – Step 4 – TP303
Figure 3.25 – Step 5 – TP303
Figure 3.26 – Step 6 – TP303
In order to range the lower
value (lower); simply insert
the magnetic tool in orifice
S as soon as LOWER is
shown on display. An
arrow pointing upward (
↑
)
increments the value and
an arrow pointing
downward (
↓
) decrements
the value. In order to
increment the value, keep
the tool inserted in S up to
set the value desired.
In order to decrement
the lower value, place
the magnetic tool in
orifice
Z to shift the
arrow to the downward
position an then, by
inserting and keeping
the tool in orifice
S , it is
possible to decrement
the lower value.
S
ADDR ADDR
1 1
In order to change the
address value, simple
take off the magnetic tool
from orifice Z as soon as
ADDR is shown on
display. An arrow pointing
upward (
↑
) increments the
address and arrow
pointing downward (
↓
)
decrements the address.
In order to increment the
address; insert the tool in
S up to set the value
desired.
In order to decrement
the address value,
place the magnetic
tool in orifice Z to
shift arrow to the
downward position
and then, by inserting
and keeping the tool
in orifice S , it is
possible to
decrement the
address value.
In order to range the upper
value (lower); simply insert
the magnetic tool in orifice S
as soon as UPPER is shown
on display. An arrow pointing
upward (
↑
) increments the
value and an arrow pointing
downward (
↓
) decrements
the value. In order to
increment the value, keep the
tool inserted in S up to set
the value desired.
In order to decrement the
upper value, place the
magnetic tool in orifice
Z
to shift the arrow to the
downward position an
then, by inserting and
keeping the tool in orifice
S , it is possible to
decrement the upper
value.