9880022800-EN-011210.doc
7
EN
■
Switch-on/off
Upon commissioning the date and time will flash on the display. To update this data,
keep key pressed for a few seconds. Scroll the main menu using up to
“SETTINGS”
and confirm the choice with key
.
Select “Date and time” and
confirm. The data adjustment screen now appears. Make the wanted amendments to the
highlighted data using
+
+
+
+
and
--
----
--
then moving the selection using the keys .
■
Menu scrolling
All menus can be scrolled in both directions with continuous circular scrolling (arrows
)
.
For fast scrolling keep the chosen key pressed. Where not all the menu is
visible on the screen, two arrows on the ( ) will indicate there are other entries in
the menu that can be selected.
The scrolling of the various menus always happens using the keys , whereas
with the keys
+
+
+
+
and
--
----
--
the times and weights temperatures values are changed. Key
confirms the choices or start of a program, whereas goes back to the various menus.
■
Particular functions
■
Settings
From the "Settings" menu it is possible to access the date and time adjustment (Date and
time), the language choice (Language), the customised recipes recording (Recipes Rec)
and (other) the brightness and acoustic adjustment of the display.
A note at the bottom of the same screen indicates the version of the program installed in
the oven, this data is useful in case of assistance to software.
□
Display brightness (Settings/Other/Brightness)
It is possible to adjust the brightness of the display for values from
0
(display not back-
lit) to
5
(maximum brightness), by acting on the keys
+
+
+
+
and
--
----
--
.
□
"Beep" (Settings/Other/Beep)
The beep intervenes for alarm signals and each time a key is pressed. The pitch can be
adjusted and it can also be excluded. Even if excluded, the beep intervenes for the
alarms.
To adjust the pitch (move selection with or ) choose a value from
1
to
9
, by
again acting on the keys
+
+
+
+
and
--
----
--
.
To exclude the beep, select the entry “Sound” using the scrolling arrows and press key
----