manualshive.com logo in svg

Smalvic F948, Use, Installation And Maintenance Instructions, Page: 21 / 23

Share
Download
Smalvic F948 Use, Installation And Maintenance Instructions Download Page 21

 

                                                                                               

9880022800-EN-011210.doc                       

21

EN 

■

 Electric connection of the oven 

Ensure the electric current has been disconnected before connecting the oven to the 
electric mains. 

Functioning happens in single-phase alternate current 220-230-240 V~ 50-60 Hz, using 
flexible cable. Ensure the household plant can support the electric load of the device. 
(see serial plate). The electric safety of this device is assured only if the same is 
correctly connected to a plant with an efficient earth connection according to the current 
legal regulations. 
In case of permanent connection to the electric mains, apply a bipolar switch 
dimensioned to the corresponding load, with opening for each contact of at least 3 mm 
in accordance with the current local regulations. 
In models where present, the flexible cable is supplied without plug. The plug to be used 
must be suitable for the electric load of the product and must comply with the current 
regulations.  
The installer must ensure that the cables section of the socket is suitable for the power 
absorbed by the oven as indicated in the serial plate. 
The connection socket must be easily accessible. 

 

■

 Assembly/replacement of the power supply cable 

The electric cable must be kept locked to the terminal box by the cable gland so it 
cannot come out. Connect the line cable to clamp 

L

, the neutral cable to clamp 

N

 and the 

yellow/green cable to the earth clamp

            

. The yellow/green cable must be longer 

than the other two by at least 20 mm.   
Pay attention that the electric cable does not pass near or comes into contact with the 
surfaces reaching a temperature above 75°C. 

 

 

 

■

 Earth connection  

The installation, the connection and the earthing of the electric system must comply with 
the European standard requisites and, however, be within the local regulatory parameters 
in force.  

This household appliance requires an earthing connection for your protection 
against any short circuits or electric dispersions. It must, therefore, be connected to 
an appropriate electric socket.  

The earth cable must not be interrupted by the switch. 

 
 
 

Summary of Contents for F948
























Reviews:

No comments