E
N
G
L
IS
H
E
N
G
L
IS
H
E
N
G
L
IS
H
E
N
G
L
IS
H
8
9880028100-EN-240314
SHARED DISPLAY
TIME display
CLOCK display
TEMPERATURE display
OPERATION display
TIMER icon
ALARM icon
PROGRESSIVE TIME icon
CYCLE DURATION icon
BLAST CHILLING icon
DEEP FREEZING icon
BLAST CH3° C icon
DEEP FREEZING -18° C icon
HARD icon
NEEDLE PROBE icon
DEFROST icon
PRECOOLING icon
BOTTLE icon
AUTOMATIC PROGRAM icon
FISH icon
MANUAL icon
STORAGE icon
KEYPAD LOCK icon
PROOFING icon
HEATING icon
APPLIANCE STARTUP DESCRIPTION
SETTING CLOCK AT FIRST STARTUP
When first hooked up to the mains, the clock is as shown in the figure
, with the hours flashing.
To set the time (in the version with knobs), turn the knob
until you see the desired value and press the
key to confirm. Perform the same procedure for the minutes.
In models without knobs, use the
and
keys to select the desired value and the
key to confirm.
SETTING CLOCK
Changes to the clock are made with the unit in stand-by (see relevant paragraph).
Hold down the
for at least 3 seconds. The hours will flash.
To set the time (in the version with knobs), turn the knob
until you see the desired value and press the
key to confirm. Perform the same procedure for the minutes.
In models without knobs, use the
and
keys to select the desired value and the
key to confirm.
BLACKOUT - POWER FAILURE
