6 |
P a g e
Powering the DP6
With a DC input voltage range of 7v to 18v, the DP6 can be used
with nearly any battery on the production market (with optional
D-‐Tap Cable).
Battery Plates
The portable power solution.
We offer several portable powering options to help our customers
reduce the amount of charging equipment that is plugged in
around the set. For example, if you’re using a Canon 7D, then you
only need to worry about keeping your LP-‐E6 batteries charged –
just one charging station.
Canon 5D/7D Battery Bracket
•
Use your Canon’s 5D/7D batteries rather than buy other
(Canon Model Number: LP-‐E6)
•
Holds 2 Batteries – Hot-‐Swap for Endless Power
•
Runs a DP6 for 4 hours straight when using 2 LP-‐E6
batteries at once
•
Fits snugly against the back of your DP6 monitor to
maintain an incredibly low profile
•
Lightest weight battery option so far for the DP6
•
Output Voltage: 7.4v
Sony NP-‐FV Battery Bracket
•
Uses Sony NP-‐FV series batteries
•
Holds 2 batteries at a time for maximum power
•
Mounts sleekly on the back of the DP6
•
Capacity is dependent on batteries
•
Output Voltage: 7.2v
Summary of Contents for DP6-SDI
Page 1: ...0 DP6 SLR DP6 SDI User Manual...
Page 6: ...5 P a g e DP6 Diagram...
Page 28: ...27 P a g e...
