SMA Windy Boy 1100, Operating Instructions Manual

Page: 56 / 68

General information SMA Technologie AG
Page 56 WB11_17-11:FE4205 Operating instructions
I-NiTest mA 0 ... 8000 8000 Activation (8000) and deactivation (0)
of the automatic leakage current
measurement. This parameter only
functions when the Windy Boy is
deactivated (disconnected on the AC
side) or in "Stop" mode.
Inst.-Code Parameters for mains grid monitoring
can only be changed after entering the
"SMA grid guard" password.
KI-Wind-Reg 0 ... 0,25 0,005 Control speed (only possible in Turbine
mode!)
KP-Wind-Reg 0 ... 0,25 0,117 Control speed (only possible in Turbine
mode!)
P-Wind-Ramp W/s 10 ... 2000 200/280 Slow startup during mains-grid
connection (only possible in Turbine
mode!)
Speicher--
funktion /
Memory
function Default,
parameter,
Reset
Betriebsdaten,
Reset Fehler none Default parameter: Returns all
parameter values to the factory setting.
Reset Betriebsdaten: Returns all user
level parameter values to the factory
setting.
Reset Fehler: Resets a permanent fault.
Speicher(n) /
Store /
Storage Permanent
volatile Permanent Permanent: Modified parameters are
stored in the EEPROM and can be used
even when the Windy Boy has been
restarted.
Volatile: Prevents the parameters from
being stored in the EEPROM, the
parameters are stored until the next
restart.
T-Start sec 5 ... 300 10 Start timer for mains-grid
synchronization. (only possible in
Turbine mode!)
T-Stop sec 1 ... 3600 2 Stop timer for stopping operation and
switching off. (only possible in Turbine
mode!)
Uac-Min /
Vac-Min V 180 ... 300 198 Lower (Uac-Min) and upper (Uac-Max)
limits of the acceptable AC voltage (self
contained power system recognition).
Uac-Max /
Vac-Max V 180 ... 300 260
U
DC
WindMax V 1 ... 800 330 U
DC
WindMax represents the highest
point of the function (please read more
about this topic in chapter 5 "Turbine
operation” (page 31)). (only possible
in Turbine mode!)
U
DC
WindStart V 1 ... 800 190 U
DC
WindStart represents the lowest
point of the function (please read more
about this topic in chapter 5 "Turbine
operation” (page 31)). (only possible
in Turbine mode!)
Name Unit
Value range
(WB 1100 /
WB 1700)
Factory
settings
(WB 1100 /
WB 1700)
Description