Appendix A
SMA
Technologie AG
Page 38
SC-100-13:SE2407
Installation manual
9 Appendix A
Notes on Transporting
Sunny Central Inverters
(SC 100 outdoor / indoor)
The aim: to avoid damage or accidents during transport by the shipping company
and on the construction site.
The following measures have been introduced to achieve this aim:
•
For delivering SC central inverters, all shipping companies have generally agreed
not to transfer the cabinets between transporters.
•
After being packed, all cabinets shall be labeled on the front and rear sides with
the international center of gravity symbol (see figure A). The symbols shall be
sprayed on using a stencil.
•
In addition, transport instructions shall be affixed to the inverter (see figure A). The
transport markings stipulate that forklift or pallet trucks must always load the switch
cabinets by their long sides (front and rear sides of the SC). It is forbidden to lift
them by their short sides.
•
Transport by crane is allowed if a suitable crane fork is used that is pushed through
the openings in the base of the switch cabinet (figure A).
•
Transporing them using the eyelets on the top of the cabinet is not allowed (SC
specific, see overview table).
•
The manufacturers shall ensure that “high quality” pallets are used.
•
The cabinets must not be tilted.
