SMA Solar Technology AG
Unpacking
Installation Guide
SMETER-IEN084710
7
3 Unpacking
3.1 Packing List
Check the delivery for completeness and for any external damage. Please contact your dealer if you
find any damage or if the delivery is incomplete.
3.2 Identifying the Schoolmeterbox
Type plate
You can identify the Schoolmeterbox using the type plate on its underside.
Firmware and Hardware
The firmware and hardware versions of the Schoolmeterbox are shown on the Sunny WebBox user
interface as parameters.
A 1 Schoolmeterbox
B 1 Manual
C 1 RS485 cabling plan poster
D 1 Plug-in power supply with 4 adapters
E 3 Plug (2x 4-pin, 1x 2-pin)
F 1 Termination resistor
G 2 Conductive bonding sheets
H 1 Shield clamp
I
2 Wall anchors
J
2 Screws
K 1 Bracket
L
1 Fastener
M 1 Screw