SMA MD.SEN-US-40, Installation Manual, Page: 28 / 36

7 Configuration SMA Solar Technology AG
Installation Manual MDSEN-US-40-IA-en-13 28
Object name Parameter Display group Settings
In-
Out.AnIn.YVal1-
NoUnt Y value 1 of charac-
teristic curve of the
analog input Device > Inputs/outputs >
Analog input > Y value 1 • 0.000 to
1500.000 W/m²
In-
Out.AnIn.YVal2-
NoUnt Y value 2 of charac-
teristic curve of the
analog input Device > Inputs/outputs >
Analog input > Y value 2 • 0.000 to
1500.000 W/m²
Procedure:
1. Activate the user interface of the inverter.
2. Log into the user interface as an
Installer .
3. Call up the menu Device parameters .
4. Click on [ Edit parameters ].
5. Expand the display group that contains the parameter.
6. Set the parameter.
7. Select [
Save all ] to save the settings.
Configuration with the help of the installation assistant
Procedure:
1. Open the user interface Calling Up the Inverter User Interface.
2. Log in as
Installer .
3. Start the installation assistant Starting the Installation Assistant.
4. In the context menu, select [
Starting the installation assistant ].
5. Select [ Save and next ] until you reach the Irradiation temperature step.
6. Select the function of the analog input and set the signal values and Y values of the
characteristic curve of the irradiation sensor.