11 Decommissioning the Product
SMA Solar Technology AG
Operating manual
MC-BOX-6-3-BE-en-30
29
11 Decommissioning the Product
DANGER
Danger to life due to electric shock when live components or cables are
touched
High voltages are present in the conductive components or cables of the product. Touching live
parts and cables results in death or lethal injuries due to electric shock.
• Do not touch non-insulated parts or cables.
• Disconnect the product from voltage sources and make sure it cannot be reconnected
before working on the device.
• Wear suitable personal protective equipment for all work on the product.
WARNING
Danger to life if raised or suspended loads tip over, fall or sway
Vibrations or careless or hasty lifting and transportation may cause the product to tip over or fall.
This can result in death or serious injury.
• All means of transport and auxiliary equipment used must be designed for the weight of the
product. Weight: 55 kg.
• Always transport and lift the product upright.
• Always maintain a sufficient safety distance from the product during transport.
• Wear suitable personal protective equipment for all work on the product.
Procedure:
1. Make sure that the product and entire multicluster system have been disconnected from all
voltage sources.
2. Open the product using the provided switch cabinet key.
3. Remove all cables from the product.
4. Release and remove the fastening screws on the bottom of the product.
5. Remove the product from the wall.
6. Lock the product using the switch cabinet key.
7. Dispose of the product in accordance with the locally applicable disposal regulations for
electronic waste.
