Installation Guide
SM VOIP Replacement Equipment Installation Manual
8 |
P a g e
Support VoIP to VoIP Service Installation Manual
Connecting your new IP phone to an existing IP phone
If you are changing from an existing VoIP service to SM VOIP Replacement Equipment and there is not
an available Ethernet cable, you will need to follow the installation instructions below. While this is not
the optimal setup, it does allow you to migrate your service without the added expense of additional
wiring. This set-up will be required until your existing numbers are ported to the Hawaiian Telcom
network.
Your current set-up may be similar to this: your existing phone is connected to your network (red line)
and then to your computer (green line).
The back of your existing IP phone may look similar to this:
