background image

If you experience problems setting up your 
amplifier, please call the Philex Customer Care Line: 

08457 573 479

 - (Local Rate UK only). 

Alternatively, please visit our technical website at  
www.philex.com/support 

Waste electrical and electronic 

products should not be disposed of 

with household waste. Please recycle 

where facilities exist. Check with your 

Local Authority for recycling advice.

If you are experience reception problems after 
installing your SLx2, please see below:

No picture or sound

No signal is reaching your television due to a 

possible break in the aerial signal path. Ensure that 

all equipment has been switched on (including the 

SLx2 amplifier) and that all coaxial connectors have 

been fitted correctly.

Problems with Digital TV Reception

It is not possible to view digital terrestrial channels 

under weak signal strength conditions. Therefore, 

typically you will either receive DTT channels with a 

clear picture and sound or you will not receive any 

channels at all.
A weak digital signal can cause occasional blocking, 

freezing or complete loss of picture. Ensure that your 

aerial is a wideband, high gain aerial suitable for 
DTT reception. Blocking, freezing or complete loss of 
picture can also occur when the signal is too strong.

If the signal is still too strong, fit a signal attenuator 
between the aerial downlead and DTT receiver to 
reduce the signal strength.

For specific help with digital TV reception problems, 
visit www.dtg.org.uk

Problems with satellite television

If you are experiencing any problems with your 
satellite television picture, check that all cables 
and connectors have been fitted correctly. If the 
problem persists it is probably due to the dish 
alignment or a temporary problem with the channel 
transmissions. Please contact your local satellite 
dealer if the problem persists.

Please Note: To view output from the satellite RF2 

output you will need a TV with an analogue tuner.

The SLx2 is not equipped with a digital bypass 

and is not compatible with infra red extenders/

links which control Sky™ boxes from other rooms. 

(Bypass kits are available - sold separately)

Technical Support

Troubleshooting

Wall Mounting Drilling Template

© Philex Electronic Ltd 2013. v1       www.philex.com

Prepare holes 60mm apart  

for wall mounting

Summary of Contents for 27822HSG

Page 1: ...bute Digital Television and Sky Sky signals around the home Please Note To view output from the satellite RF2 output you will need a TV with an analogue tuner The SLx2 is not equipped with a digital bypass and is not compatible with infra red extenders links which control Sky boxes from other rooms Bypass kits are available sold separately Designed with style sophistication and value in mind the S...

Page 2: ...1 Connect your UHF aerial downlead or your FM DAB aerial downlead to the ANT socket 2 Connect your TVs or FM tuners to either of the SLx2 TV1 or TV2 sockets in any combination If your TV does not have a built in Freeview receiver you will need to connect your TV to the amplifier via a Freeview set top box ...

Page 3: ... the system following a short circuit simply remove all outputs and inputs switch off the amplifier and remove the power cable from its socket for approx 30 seconds You should then reconnect the amplifier outputs one by one until you can find which output is causing the short circuit Amplifier features Specifications Inputs Outputs UHF Freq VHF Freq Max output Gain per port VHF UHF Noise Isolation...

Page 4: ...cking freezing or complete loss of picture Ensure that your aerial is a wideband high gain aerial suitable for DTT reception Blocking freezing or complete loss of picture can also occur when the signal is too strong If the signal is still too strong fit a signal attenuator between the aerial downlead and DTT receiver to reduce the signal strength For specific help with digital TV reception problem...

Reviews: