Short circuit protection
For added safety the SLx2 has
built-in short circuit
protection
. Should a short circuit be detected, the
amplifier will shut down in order to prevent any
possible damage. Should this occur, all outputs will
be switched off but the power LED will remain lit.
To reset the system following a short circuit,
simply remove all outputs and inputs, switch off
the amplifier and remove the power cable from
its socket for approx 30 seconds. You should then
reconnect the amplifier outputs one by one until
you can find which output is causing the short
circuit.
Amplifier features
Specifications
Inputs Outputs UHF Freq. VHF Freq. Max output Gain per port
(VHF) UHF
Noise
Isolation
Loss
Weight
Dim. mm
1
2
470-790MHz 47-230MHz 94dBµV
0 -18dB
3.5dB
22dB
330g
130 x 75 x 45
