1. Use as directed:
This product serves exclusively lighting purposes and may:
only be operated using a suitable controller (output current
350mA, e.g. art-no.470523/24)
not be exposed to strong mechanical loads or to strong
contamination.
only be installed and operated after a condition inspection if the
product is dirty or has been moistened through storage.
not be modified or converted.
If these points named above are not adhered to, a short circuit or
electrical shock may occur!
2. Technical Data:
Operating current:
350mA
Safety class:
III
Safety type:
IP 65
Bulb:
Power LED, 15x1W
Dimensions (W/H/D):
52 / 5,3 / 8 cm
Swivel range:
180°
Weight:
1,26 kg
Importeur: SLV
Elektronik
GmbH
IP 65
: Protection against dust(dust-tight) - Protection against jetted water
from all directions
3. Installation
The electric connection may be executed only by an electric expert
who is familiar with the valid directives!
Caution:
Switch off the power of the mains supply line or
respectively of the connection lead before doing any works
.
Use only
parts, which are supplied with the product or are described as accessories!
Otherwise the product or the installation might not be sufficiently safe.
Indication for the installer
: In case you do not install a completely
supplied system (with transformer), you are considered a "manufacturer" by
the low-voltage directive. In this case you are required to ensure the
conformity of the whole system and declare it by attaching the
CE-sign
.
Installation place:
The product is suited for
wall-, ceiling and floor installation
.
Make sure that the product is mounted on a
stable, even and tilt-fixed
background
.
Separate Installation Steps
Keep the whole installation off power until the work is completely
finished. A connection with the power on will destroy the LED.
Determine the place of installation and mark and drill the holes for
fixation. Fasten the fitting on the installation surface using properly
dimensioned fastening materials that suit the installation surface.
Ensure the secure hold of the product!
Connection
Outdoor installations must comply with valid regulations for this kind
of installation area!
Lay a blank tube, for protecting the connection lead, to the power
supply.
Use an outdoor connection box(e.g. SLV-art.-no. 228730) to connect the
product.
Connection to the POWER LIM
®
controller (art.-no. 470523/24):
Establish the installation according to the installation diagram.
The product is ready for operation.
4. Operation
:
Operate the product only with the complete and undamaged protection
glass.
An operation without or with a damaged protection glass is not
permitted.
Information for the user:
Operate the product only if it is working correctly. Switch off the product
with a malfunction immediately and operate it again only after examination
by an electrical specialist. This is the case, when:
visible damages appear.
the product does not work.
smoke, steam or crackling sounds appear.
an overheating is recognisable.
Repairs of the product or work on mains voltage-prominent sections may
only be carried out by qualified electricians.
Warning:
Here exists mortal danger from an electric shock!
How to avoid failure and fire risk:
Do not cover the product - provide free air circulation!
Do not hang or fasten anything on the product, especially no decoration.
Never let children play unsupervised with electric products! Children
can not always estimate dangers in dealing with electric energy correctly.
The following enviromental influences may have unwanted effects on
the surface of the product:
acid rain and sour soil
high salt content in the air
thawing salt
cleaning agents
other chemical substances (e.g. herbicides)
Protect the product by adequate means to avoid unwanted changes of the
surface.
Cleaning tip
: Switch off power! Clean the product with a damp
cloth.
What is to do if a bulb is defect or does not work?
Under regular usage the LED bulb has an extraordinary long lifetime. If
nevertheless damage or failure occurs, contact your local dealer to
exchange the LED bulb.
5. What else has to be considered?
Disconnect the product from power
, before you…
clean or maintain the product.
do any works on the product or its components (electric expert).
Art.-Nr. 229463 06/2007
©
by SLV Elektronik GmbH
Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany
Technical Details are subject to change.
Duplication prohibited !
ENGLISH
Instruction Manual
for LED RGB outdoor fitting
229463
Please read carefully and keep for further reference !
RED
GREEN
BLUE
BLUE
GREEN
RED
+
+
+
-
-
-
art.-nr. 470523
POWER LIM 350CC
art.-nr. 228730
R
G
B
B
G
R
+
+
+
-
-
-
art.-nr.
229463
