SlurryKat Doda HD35, Operation And Maintenance Manual

Page: 25 / 37

Operation and Maintenance Manual-
Doda HD35 – Slurry Centrifugal Pump
25
PTO (Power Take Off)
The PTO connection is supplied with a cover in place to prevent personal injury. Do
not remove this cover or operate the mixer without this cover in place.
Lubricate the PTO Shaft with High temperature grease after every 4-5 hours of
operation
MAX PTO INPUT 540 R.P.M.
Contact your nearest dealer or a specialised retail outlet if the PTO must be replaced
with a longer one, since this must belong to the same power category and possess
the same characteristics.
• Always disengage the PTO, shut off the engine and remove the keys
before leaving the tractor seat. You can’t be injured by the PTO or other
machine parts if the driveline isn’t rotating!
• Keep tractor master shields in place at all times.
• Check frequently to confirm that integral shields are in good condition.
With the power shaft stopped, you should be able to rotate the shield
freely by hand. Look for nicks, dents or bends that could catch clothing.
Damaged shields, shafts, bearings, etc. must be repaired or replaced
before the machine is operated.
• Never step across a rotating power shaft. Some equipment must be
operated in a stationary location where you are working. Always walk
around the revolving shaft. Safety devices are usually reliable, but could
malfunction.
• An unsuitable PTO could easily break.