background image

PARTS LIST

2A

2B

2C

Item # Part # 

Description

EAF-14-A  Faucet Sensor Assembly (EAF-275 only)

 

EAF-19-A  Faucet Sensor Assembly (EAF-200 and EAF-225 only)

 

EAF-21-A  Faucet Sensor Assembly (EAF-250 only)

 

EAF-16-A  Faucet Sensor Assembly with i.q.-Click (EAF-275 only)

 

EAF-18-A  Faucet Sensor Assembly with i.q.-Click (EAF-200 and  

 

 

EAF-225 only)

 

EAF-20-A  Faucet Sensor Assembly with i.q.-Click (EAF-250 only)

2A 

EAF-1006  Cap with Solar Cell Assembly (EAF-275 only)

2B 

EAF-27 

Cap (EAF-250 and EAF-200 only)

2C 

— 

Cap (EAF-225)

3A 

EAF-12 

0.5 gpm (1.9 Lpm) VR Pressure Compensating Spray Head

3B 

EAF-22 

1.5 gpm (5.6 Lpm) Pressure Compensating Aerated  

  

Stream 

3C 

EAF-10 

2.2 gpm (8.3 Lpm) Aerator Spray Head

3D 

EAF-13 

2.2 gpm (8.3 Lpm) Laminar Flow Spray Head

EAF-1003  Battery Replacement Kit

EAF-1 

Faucet Mounting Kit

EAF-9 

Strainer (Filter)

7A 

EAF-1004  Mixer Handle Assembly and Cartridge

7B 

EAF-1005  Handle Repair Kit

EAF-1007  Handle Cap

EAF-1008  13” (330 mm) Flexible Supply Hose

10 

EAF-44 

Power Splitter†

11 

EAF-24-A  11-13/16” (300 mm) Extension Cable

 

EAF-25-A  47-1/4” (1200 mm) Extension Cable

 

EAF-17-A  126” (3200 mm) Extension Cable

12 

ETF-312-A  Trim Plate for 4” Centerset Sink

13 

ETF-510-A  Trim Plate for 8” Centerset Sink

14 

EAF-11 

Plug-in Adapter (Models EAF-200/225)

15 

EAF-2

 Solenoid

† EAF-44 replaces the separate EAF-23-A Splitter Cable and EAF-28 

Capacitor, which is sold separately.

3A

3B

3C

3D

7A

7B

4

1

5

13

9

12

6

8

14

The information contained in this document is subject to change without notice.

SLOAN • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131

Phone: 1-800-982-5839 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloan.com

© 2016 SLOAN  

   

 

Code No: 0816490 – Rev. 6 (05/16)

11

10

15

1. Problem:  Faucet does not function.

  Cause: 

Adhesive packaging label affixed over sensor eye.

  Solution:  Remove adhesive label from sensor eye.

  Cause: 

“Permanent Off” activated.

  Solution:  Press button on faucet throat one time.

2. Problem:  Faucet delivers water in an uncontrolled manner.

  Cause: 

Faucet is defective.

  Solution:  Contact the Sloan Technical Support (see below).

3. Problem:  Faucet does not deliver any water when Sensor is 

 activated.

  Indicator:  Solenoid valve produces an audible “CLICK.”

  Cause: 

Water supply stop(s) closed.

  Solution:  Open water supply stop(s).

  Cause: 

Water supply stop strainer(s) clogged.

  Solution:  Remove, clean, and reinstall water supply stop strainer(s).

Replace strainer(s) if required.

 

Indicator:  Solenoid valve DOES NOT produce an audible “CLICK.”

  Cause: 

Battery low (battery-powered models).

  Solution:  Replace battery (refer to Battery Replacement on Page 3).

  Cause: 

Power failure (EAF-200 Models).

  Solution:  Check power supply.

4. Problem:  Faucet delivers only a slow flow or dribble when Sensor 

 

is activated.

  Cause: 

Water supply stop(s) are partially closed.

  Solution:  Completely open water supply stop(s).

  Cause: 

Water supply stop strainer(s) clogged.

  Solution:  Remove, clean, and reinstall water supply stop strainer(s). 

Replace strainer(s) if required.

4. Problem:  Faucet delivers only a slow flow or dribble when Sensor 

 

is activated.

  Cause: 

Aerator is clogged.

  Solution:  Remove, clean, and reinstall aerator. Replace aerator if 

required.

  Cause: 

Faucet is defective.

  Solution:  Contact the Sloan Technical Support (see below).

5. Problem:  Faucet does not stop delivering water or continues to 

 

drip after user is no longer detected.

  Cause: 

Valve is defective.

  Solution:  Contact the Sloan Technical Support (see below).

6. Problem:  LED indicator blinks when faucet is in use.

  Cause: 

Battery low (battery-powered models).

  Solution:  Replace battery (refer to Battery Replacement on Page 3).

7. Problem:  The water temperature is too hot or too cold on a faucet 

 

connected to hot and cold supply lines.

  Cause: 

Supply Stops are not adjusted properly.

  Solution:  Adjust Supply Stops.

  Cause: 

For models with integral mixing valve — Mixing valve is set 

improperly for the water temperature desired.

  Solution:  Rotate mixing valve handle clockwise to decrease water 

temperature or counterclockwise to increase water 

temperature.

When assistance is required, please contact Sloan Technical Support at:

1-888-SLOAN-14 (1-888-756-2614)

TROUBLESHOOTING GUIDE

Summary of Contents for Solis EAF-275 Series









Reviews: