background image

Code No. 0816835

Rev. 1 (03/12)

INSTALLATION INSTRUCTIONS FOR OPTIMA

®

 SYSTEMS  

SURFACE MOUNTED SENSOR ACTIVATED 

CONCEALED CLOSET AND URINAL FLUSHOMETERS

Concealed Closet 

Flushometers

1” I.P.S. Outlet

•  Model 150 ES-SM

1-1/2” Concealed Back Spud

•  Model 152 ES-SM

Concealed Urinal 

Flushometers

1-1/4” Concealed Back Spud

•  Model 190 ES-SM

3/4” I.P.S. Outlet

•  Model 194 ES-SM

3/4” Concealed Back Spud

•  Model 195 ES-SM

MODEL 152 ES-SM

MODEL 190 ES-SM

MODEL 195 ES-SM

MODEL 150 ES-SM

MODEL 194 ES-SM

LIMITED WARRANTY

Unless otherwise noted, Sloan Valve Company warrants this product, manufactured and sold for commercial or industrial uses, to be free from defects in material and workmanship 

for a period of three (3) years (one (1) year for special finishes, SF faucets, PWT electronics and 30 days for PWT software) from date of first purchase. During this period, Sloan Valve 

Company will, at its option, repair, replace, or refund the purchase price of any product which fails to conform with this warranty under normal use and service. This shall be the sole 

and exclusive remedy under this warranty. Products must be returned to Sloan Valve Company, at customer’s cost. No claims will be allowed for labor, transportation or other costs. 

This warranty extends only to persons or organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of resale. This warranty does not 

cover the life of the batteries.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY RESPONSIBLE FOR 

ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.

Summary of Contents for 150 ES-SM









Reviews: