FOIL ASSEMBLY
1.
Position fuselage so that the counter-sunk holes are
facing DOWN.
Attach the pedestal to the mast with the two M8 X 40MM
bolts, tightening each one bit by bit until both are tight.
3.
Slide the front wing and fuselage together so that the three
bolt holes in each line up.
4.
Slide the mast onto its designated location on the fuselage,
also ensuring all holes line up.
5.
Bolt the front wing, mast and fuselage together. To do this,
you may find it easier to flip the mast over and balance
it on the pedestal. Start with the two M8 X 45 MM bolts,
tightening each one bit by bit until both are tight. Finish
with the M6 X 25MM counter sunk bolt to ensure a tight and
secure connection.
6.
Connect rear wing components to fuselage. First, nest the
two rear wing components together making sure the bolt
holes in each line up. Make sure that the rear wing is oriented
correctly with the wings flaring upwards, opposite of the
front wing. Next bolt the two rear wing components to the
mast, tightening each one bit by bit until both are tight.
*Coat all bolt hardware with Lanolin oil or marine-grade grease and
wrap with Teflon tape before assembling your foil. (see maintenance
section for details)
6
DO
WN POSITION
5
2.
