Slinex Sonik 7, User Manual

Page: 11 / 14

Area
− motion detection area setting defines the part of the image in which motion detection
performed;
SONIK 7
19 20
2019/09/23 17:36:42
Motion detection
NO
Off
05 sec
00 sec.
Record
Hardware motion detection
CAM1 sensor type
CAM2 sensor type
CAM1 alarm time
CAM2 alarm time
Alarm type
Hardware motion detection can detect motion by means of external device (hardware motion sensor).
There are two types of sensors that can be connected to the monitor: sensor with normally opened
contacts (NO) and sensor with normally closed contacts (NC).
Depending on the type of sensors that are used appropriate settings must be made in the hardware
motion detection settings menu.
Hardware motion detection has a number of settings described below:
CAM1 sensor type:
«NO», motion sensor with normally disconnected contacts are used;
«NC», motion sensor with normally connected contacts are used;
«Off», motion sensor is not used;
CAM2 sensor type:
«NO», motion sensor with normally disconnected contacts are used;
«NC», motion sensor with normally connected contacts are used;
«Off», motion sensor is not used;
CAM1 alarm time
− alarm melody ringing time (from 00 to 10 seconds), activated by CAM1 motion
sensor;
CAM2 alarm time
− alarm melody ringing time (from 00 to 10 seconds), activated by CAM2 motion
sensor;
Alarm type:
«Snapshot» − save photo if motion detection occurs;
«Record» − save video if motion detection occurs.
Hardware
motion detection
Main
menu
Settings
Motion
detection
Home screen
System
Ring
Video
Memory
Motion detection
Photo frame
About
Factory reset
+12 V
Ground
Ground
Video
Camera
power
supply
Motion sensor
CCTV camera
Not used
Signal
Ground
Video
External motion sensor connection schematics.
Use up/down/right/left arrow keys to move motion detection area in corresponding direction of the
image while mode;
Use right/left arrow keys to move right motion detection area border or up/down arrow keys to move
bottom area border while mode;
Press or icon to change between moving and resizing motion detection area modes.
7.6. Hardware motion detection settings