Slinex SONIK 7 Cloud, User Manual

Page: 11 / 35

SONIK 7 Cloud
19 20
Network
Net pairing mode AP mode
Cloud services Unconnected
Wi-Fi hotspot SmartLife-b1e24f
Password 12345678
Main menu
→
Settings
→
Camera
Channel activation − include or exclude current video channel from viewing list;
Sensor type − type of the sensor connected to the corresponding camera:
«NO», motion sensor with normally disconnected (opened) contacts is used;
«NC», motion sensor with normally connected contacts is used;
«Off», motion sensor is not used;
Signal mode − PAL, NTSC or Automatic;
Signal type − AHD 720P / AHD 1080P / TVI 720P / TVI 1080P /CVI 720P / CVI 1080P / CVBS;
Alarm time − alarm time in case of hardware motion detection event, from 1 to 20 sec.;
Alarm record mode − record type when motion event occurs, «Snapshot» or «Video»;
Motion detection − enable and set the sensitivity of program motion detection;
Motion detection duration − program motion detection recording time;
Motion display − enable/disable screen activation if program motion detection occurs;
Motion ringtone − enable and set the melody if program motion detection occurs.
Hardware motion detection can detect motion by means of external device (hardware motion sensor).
There are two types of sensors that can be connected to the monitor: sensor with normally opened
contacts (NO) and sensor with normally closed contacts (NC).
Depending on the type of sensors that are used appropriate settings must be made in the hardware
motion detection settings menu. External sensors connection diagram you can find on the page 6.
Main menu
→
Settings
→
Network
Net pairing mode − monitor network connection mode,
«AP mode» – manual Wi-Fi connection mode;
«Cable» – wiring conection to the local network;
«EZ mode» – automatic Wi-Fi connection mode;
Cloud services − cloud server connection status;
Wi-Fi hotspot − hotspot name;
Password − hotspot password;
IP address − device network IP address (available only in «Cable» and «EZ mode»);
MAC − device MAC address (available only in «Cable» and «EZ mode»).
Main menu
Settings
Camera
8.4. Camera settings
Press «Settings» icon in the main menu then press «Camera» icon to enter camera settings menu:
Camera 1
Channel activation
Sensor type NO
Signal mode PAL
Signal type AHD1080
Alarm time 4 Sec
Alarm record mode Video
Motion detection Off
Motion detection duration 20 Sec
Motion display
Motion ringtone Off
Camera 1
Camera 2
Main menu
Settings
Network
8.5. Network settings
Press «Settings» icon in the main menu then press «Network» icon to enter network settings menu: