Network
→
Network
→
DHCP enable
– IP address receiving type (dynamic if this option enabled)
→
IP address
– device IP address
→
Subnet mask
– network subnet mask
→
Gateway
– gateway IP address
→
Primary DNS
– primary DNS server IP address
→
Secondary DNS
– secondary DNS server IP address
→
TCP port
– port number for data exchange between monitor and PC
→
Mobile port
– mobile devices port number
→
Transfer policy
– transfer policy type (adaptive, quality or fluency preferred)
→
MTU
– MTU port number
→
HTTP port
– management port number
→
Net service
→
IP FILTER
– IP addresses list for filtering
→
DDNS
– DDNS server setup
→
UPNP
– UPnP settings
→
Wi-Fi
– Wi-Fi connection settings (additional info on the page 18)
→
RTSP
– RTSP port number
Record
→
Record -
record time schedule setting (additional info on the page 18)
→
Backup -
creating backup archive (additional info on the page 19)
Alarm set
→
Motion detect
→
Channel
– current channel number for making settings
→
Sensitivity
– software motion detection sensitivity
→
Record channel
– choose the channel number to perform recording
→
Push
– enable/disable push messages while software motion detection
→
Enable
– enable/disable software motion detection for current channel
→
Region
– motion detection area setting (additional info on the page 20)
→
I/O alarm
→
Alarm input
– current channel number for making settings
→
Type
– type of hardware sensor (normally opened or normally closed)
→
Record channel
– choose the channel number to perform recording
→
Push
– enable/disable push messages for hardware motion detection
→
Enable
– enable/disable hardware motion detection for current channel
Door setting
→
Basic
→
Call REC
– incoming call recording mode: Video or Picture.
→
Do not disturb mode
– turn off incoming calls melody (if enabled)
→
DND mode schedule
– do not disturb mode enabling schedule
→
Ring
→
Door 1 ringtone
– incoming call melody for the first outdoor panel
→
Door 2 ringtone
– incoming call melody for the second outdoor panel
→
Volume
– incoming call melody volume
→
Ring time
– incoming call melody ringing time
→
Door 1 unlock time
– relay unlocking time for the first outdoor panel
→
Door 2 unlock time
– relay unlocking time for the second outdoor panel
→
Button sound
– enable/disable touch sounds
Note:
* Monitor supports high resolution AHD, TVI and CVI outdoor panels and cameras with actual resolution
up to 1080p (2MP). Also two IP cameras can be connected to the Camera 1 and Camera 2 monitor
channels. If camera or outdoor panel video standard doesn’t suits monitor settings then there is no image
on the corresponding video channel.
Main menu has following structure:
System
→
General
→
System time
– current date and time
→
Date format
– date displaying format
→
Time format
– time displaying format
→
Language
– monitor menu language
→
SD full
– enable overwriting data or stop record if SD card is full
→
Video standard
– video signal type (PAL or NTSC)
→
CVBS out
– additiaonal monitors video stadard: HD(AHD) or D1(CVBS)
→
Screensaver
– enable/disable clock display in standby mode
→
Video
→
GUI display
– video input name setting and additional indicators displaying
→
Image Set
– video channel parameters settings (brightnes, contrast, saturation, etc.)
→
Output adjust
– top, bottom, left and right margins adjust
→
Encode
– compression modes for every single channel
→
Channel type
– channel display mode (analog or digital)
SL-10IPT HD
15
16