7
8
4. Schematic diagram
Power (Red)
Audio (White)
GND (Black)
Video (Yellow)
COM (Brown)
NO (Blue)
Lock
ML-20HR
SL-07M (Master)
Lock power
supply
Camera power
(Red & White)
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
Camera
power
suppply
(Optional for using cameara as
a source of video for DVR)
1) Take the angle bracket from the kit and place it 150-160 cm from the floor
line;
2) Mark and drill two halls inside the wall;
3) Take two anchors from the kit and hammer them into the drilled halls;
4) Fix angle bracket on the wall by two screws from the kit;
5) Fix wall mounting bracket on the angle bracket by two screws from the kit;
6) Connect all communication wires and fix the door panel on the wall
mounting bracket by the screw from the down side.
5. Installation
{ Design. Uniqueness. Innovations }
SERIES
ACCESSORIES
