Slinex ML-20HR User Manual Download Page 2

1

2

Rev. 2.0

Safety instructions

Read and keep that manual.
The device installation process should be carried out by the qulified specialists.
Use the device  from the –40  ˚C to +65 ˚C, always keep it within that 
temperature range.
Installation surface should be free from vibration and impact influence.
Keep this device far from open sources of heat, such as radiators, heaters, and 
ovens.
The device can be installed near other electronic equipment in case if the 
temperature of the environment does not exceed previously mentioned 
range.
The device should be protected from the direct influence of the natural 
phenomena, such as direct sunlight, rain or snow.
Don’t use aggressive or abradant detergent for the device surface cleaning.
Use soft wet cloth or tissue to remove strong dirt.

Attention! 

As a result of continuous upgrades and functionality 
improvements, technical characteristics of this device can 
be changed without any preliminary declaration.
This manual can contain some inaccuracy or misprint. 

The owner reserves the right to make corrections to the information described 
in that user manual and device package. 
The last revision of this manual is available on www.slinex.com

Nature protection

Don’t throw away the device with other  industrial or 
nutritive trash if you see that symbol. Some regions have 
separation and recycling systems for the electronic 
equipment. 

Connect with local authorities to receive information about  recycling of 
electronic equipment for your region.

Rights and limitation of liability

All rights reserved. Any part of that document can not be published in any 
form, translated into other languages or reproduced in any way including 
electronic or mechanical. 
Document recording and copying is strictly denied without owner permission.

!

{ Design. Uniqueness. Innovations }

SERIES

ACCESSORIES

Summary of Contents for ML-20HR








Reviews: