29
5. LCD Icon Guide
1.
Battery: Divided into 3 blocks. During normal use, this shows the amount of
power remaining. When charging, the blocks cycle from the bottom up, going from
0 to 3 blocks. Once fully charged, the icon stays at 3 blocks.
2.
Satellite: Indicates the GPS positioning status. Blinking means no fix or
scanning for satellites. Constant means position acquired or still acquiring fix.
3. Time: Shows the cumulative riding time. When Reset to 00:00:00, it will start
counting riding time when the user starts riding (reaches 5km/hr). If riding time
exceeds 24 hours, it resets to 00:00:00.
4. TOA: Time of Arrival. When switched to Waypoint and Route display mode, it
shows the estimated time of arrival. If current speed is under 5km/hr, there is no
GPS fix, or if distance to target is more than 24 hours, --:--:-- is displayed.
5.
：
Time display.
6.
：
Shows the time for the current region. Taiwan, for example, must be set to
UTC +8hr based on the GPS reference time. If GPS fix not acquired, then the time
display changes to --:--:--.
7. DTG: Distance to GO. When switched to Waypoint and Route display modes,
shows the estimated direct line distance.
8. ODO: Odometer. Shows the current distance traveled in MI (miles) or KM
(kilometers).
9. DST: Distance. Displayed in MI or KM. Resets to zero when device is turned on or
off.
10. AZM: Azimuth. Reads the current azimuth from the e-compass and displays it in
